Wednesday, September 10, 2008

Automotive Mirrors

As the lead manufacturer and supplier of Automotive Mirrors, either directly or through our supplier network, FLABEG caters for the industries needs at a global scale.

Whether high-quality aspherical, convex and flat exterior mirrors, or wedge-shaped and non-glare interior mirrors, we manufacture at our sites worldwide and deliver just in time.

Uniform quality management at all locations, computer-controlled inspections and production processes that are constantly optimized provide the highest possible levels of production reliability and quality, ensuring complete customer satisfaction.

FLABEG: reliable, experienced partners, offering you top quality service and individually tailored solutions.

Fitting Auto Body Kits

Fitting auto body kits to your car, truck or SUV can radically update your vehicles appearance. In fact, once many of the latest ground effects kits have been fitted it is often difficult to see where the original car ends and the kit starts.

With the popularity of motor sports again on the rise it is only natural for people to want the latest performance ‘look’ for their own car. And highly styled cars as featured on the Nascar and Touring Car circuit are helping to fuel the demand for the street racer look

So how do you choose the right body kit? Well, the first step is to check out some of the car performance magazines. Here you will find the good, the bad and the downright ridiculous! Make a note of the designs that catch your eye and jot down any relevant details such as manufacturer, style name or model number.

Many auto stores now sell body kits online so you can browse sites such as Streetbeats or JCWhitney to compare prices.

As you plan out your project it is worth taking into consideration any other related tasks that will need to be done such as upgrading your braking system or perhaps lowering the suspension. Only start the job when you have all the parts you need to complete that stage of the project. As ever, a little planning before you start can save a lot of heartache later!

As with any job, the work is a lot easier if you have the right tools for the task. No, I’m not suggesting that you go out and buy a complete new set of tools, but you really do need to replace any that are worn out or are in a poor condition. Using substandard tools can cause expensive damage to the body kit or worse, to yourself.

On the subject of safety, it is essential that you have a safe and clean working environment. Take a tip from the professionals and think safety. By taking a few simple precautions you will remember the project for all the right reasons. This is especially important when the car is raised. Propping the car on a few bricks is not an option!

So you are now ready to fit the kit. I have one piece of advice, read the instructions first. Check that your kit has all the parts and tick them off on the parts list. It doesn’t matter how experienced you think you are or how many kits you have fitted for friends, read the manual before you begin. As body kits get ever more sophisticated there is often a set way to install each piece so that it lines up with the rest of the body perfectly. Get this wrong and your car will look distinctly amateurish.

The final stage is to paint the kit to blend in with the rest of the car. Most installers respray the whole car rather than try to match up each piece. Once again, safety is the key and particular attention needs to be taken to both the fire risk and breathing hazard of the job. The area should be well ventilated and a mask should be worn.

Your only task now is to get out there and enjoy driving your new vehicle.

The Classic American Car

Ford Crown Victoria: The Classic American Car

The Ford Motor Company is yet again behind one of the superb vehicles – the Ford Crown Victoria. This vehicle is a full-size car that had its history of production dating back to the 1950s, and relived again in the 1970s. It had quite a mediocre sale in the general public’s market, however, it gained much popularity among the ranks of those in uniform. This is a full-sized sedan, and is more often known as “Crown Vic”. It is more known to be a top-of-the-line sedan among the Ford’s creations. Its predecessor was the Ford LTD. And just like the Ford LTD, the Ford Crown Victoria is also usually used as a taxi cab, fleet vehicle, and police car.

The very first of the Crown Victorias had its humble makings starting in the year 1955. It made its way down the streets as a two-door six-seater hardtop coupe. It differed from the regular Victoria model through its having a stainless steel band that ‘crowned’ the roofline, passing right over the car, as an extension of the B-pillar line.

People talking about a traditional American are more often than not talking about vehicles like the Ford Crown Victoria, or its twin the Mercury Grand Marquis. The Ford Crown Victoria is a large car with a V8 engine under the long hood and a body separate from its steel frame. Furthermore, it has wide bench seats, soft suspension, a relatively large trunk, and poor fuel economy. The police have liked the Ford Crown Victoria because the engine makes it fairly quick, along with its rear-wheel drive that provides predictable handling, the interior can handle and take in the officer and all the police gear, plus the simple mechanicals are durable. Overall, the vehicle is not expensive.

This vehicle has been made available in three trim levels which comprises of the Standard, the LX, and the LX Sport. The Standard is plain, which is what most fleets like. The mid-line LX has alloy wheels, making it exude the look of more like a civilian machine. The LX Sport has slightly larger alloy wheels. Ordering it in dark red, gray, black, or silver birch means that it comes with a color-matched monochrome trim. The black LX Sport looks a lot like an unmarked police car.

As for the Ford Crown Victoria’s interior, it is currently one of the few remaining cars that are sold in the U.S. that still offer a bench front seat. The seats are soft, however for longer drives, it could get uncomfortable for passengers since it lacks support. The controls found inside this vehicle are fairly simple and straightforward.

Ford Crown Victoria owners can shop for discount car parts and accessories from http://www.carpartsmax.com auto parts catalog. In stock are thousands of Ford Crown Victoria parts for all enthusiasts. From engine and radiator parts to lights and hoods and wheels, customers can find everything to repair and maintain their Ford Crown Victoria.

Although the Ford Crown Victoria has squishy seats, a mushy handling, and modest V8 engines, these are overpowered by the vehicle’s huge trunk. Also, one plus for this is that because it is often mistaken for a cop car, the Ford Crown Victoria receives respect when on the road. And, this vehicle is certainly a full-size, rear-drive Americana.


Car Repair Prices

Fuel Injection Services, Are They Worth It?

Fuel injection services are growing in popularity for the following reasons in the order of motive.

1) Increases service center's profit
2) It's an easy sell with today’s gas prices
3) Offsets manufacturers' maintenance reductions
4) Poor gas quality
5) Poor adherence to vehicle maintenance

Notice that "It's required" did not make the list. That's because fuel injection services are not required the majority of the time.

However, injector services are at times beneficial, even necessary. See the following frequently asked question and answers…

What do they do?

Depending on the product, injection services clean naturally forming carbon deposits from the fuel injectors and fuel rails—some will even clean the fuel tank, and valve carbon deposits.

Do they work?

In short, yes. Provided it’s a premium product (such as BG), and the service is performed correctly. Fuel injection services can do amazing things. They can improve fuel efficiency, increase horse power, and repair some performance concerns, although these benefits are rare.

Whether or not fuel injection services will do all the above "every time" for your car is another story.

I have even seen fuel injection services quiet horrendous carbon knocks--a knocking noise from the engine due to excessive carbon build-up coming in contact with internal engine components.

Are they worth it?


Maybe. It really depends on the condition of the vehicle. If the service achieves any of the advertised claims, it may be worth it. In truth, most cars don’t need it. The consistent use of quality fuel, and proper vehicle maintenance should be all that is necessary to keep a car running properly.

However, consistent use of cheap gas and poor adherence to an auto maintenance schedule, as well as certain driving styles can significantly increase the accumulation of carbon deposits. Thus the possibility of poor fuel efficiency, decreased horsepower, and performance issues increases--all of which could be helped by injector maintenance.

The other factor to consider is the expense. How much fuel savings justifies the cost of the fuel injection service, and how long is the pay off. BG claims that their product will pay for itself in a year's time. However, remember that the condition of the vehicle is a big variable! If the car doesn't need it, there's no benefit.

How often should it be done?

It depends on the product, but generally between 15,000 to 30,000-miles.

Are they necessary?

It depends: See the discussion under Are they worth it?

Can a fuel injection service do any damage to my engine or car?
Not if done correctly. Done incorrectly, anything goes. A technician could conceivably hydro-lock your engine, or blow a hole in the piston—although both scenarios are rare.

If anything does go wrong, there is usually an underlying problem, which gets exacerbated by the fuel injector auto maintenance.

Why doesn’t my manufacturer recommend fuel injector cleaning auto maintenance?

No manufacturer recommends fuel injector cleaning auto maintenance under normal operating conditions. From a manufacturer’s viewpoint: take care of your car right (i.e., as the manufacturer dictates) and you’ll be fine.

However, depending on the problem, some manufacturers will recommend fuel injector cleaning auto maintenance as the cure—especially carbon knock. With the wide variety of fuel qualities available, manufacturers are reconsidering fuel injector cleaning auto maintenance.

How much does fuel injector cleaning auto maintenance cost?
Prices vary depending on the service center and the actual procedure performed, and product used. The procedure you want should clean the entire fuel system including the tank and should not cost more than $150.

Also, make sure the service is actually performed as fuel injector maintenance is a common scam across the industry.

Lastly, fuel injection maintenance is often presented in such a way as if it is the magical cure for all your car's quirks--it not!

When in doubt, don't do it.

The History of GM - General Motors

The history of GM, the world's largest automaker, saw it's beginning in 1908. The company was founded by William Durant in the year 1902. The shrewd businessman that he was, Durant realized that the future lay with cars and not carriages. Initially, the company was founded as a holding company for Buick. The latter part of the year saw the company acquiring Oldsmobile, followed by the possession of Cadillac, Oakland and Elmore in the very next year.

Many of the motor companies were in dire straits during the difficult years of the early 1900's. The stock market panic in 1907 put a lot of small companies into financial distress. Many of these companies were running on credit from various bankers. This was a golden opportunity for Durant, who proceeded to buy smaller car builders, and companies that built car parts as well as car accessories. In 1908, these various companies were folded into a single unit, thus creating the new GM entity. This marked the exciting beginning of the true history of GM.

William Durant was a flamboyant businessman whose curious mix of genius and over-reaching took GM both to its heights as well as plunged it into financial distress. In 1910, bankers were forced to step in to prevent financial collapse of GM, and Durant was removed from the company he had founded. But by 1911, the company had made enough advances into the international market that the General Motors Export Company was established to handle sales outside the U.S and Canada.

Durant managed to use another company he formed, Chevrolet, to come back to power in GM during 1915, and the history of GM from 1915-1920 is full of successes. During this time, the Cadillac became wildly successful. In 1918, GM bought the operating assets of Chevrolet Motors. But, soon America was hit by a power recession and in 1920, Durant again found himself out of the company.

During the financial boom in the 1920's, the history of GM virtually glowed with success. Auto sales reached the 4.5 million mark, and the auto industry now had three giants - GM, Ford and Chrysler. GM now had a brilliant engineer turned industrialist at its helm. Alfred Sloan who was later acclaimed for his marketing genius had slowly worked his way up among the ranks of GM. His marketing genius breathed a fresh lease of life into GM that was beginning to get overshadowed by Ford.

Ford's philosophy of giving the public the best value for their money offered little variety. But Sloan and GM were interested in providing the public with more than a black box. Stylish colors, features and comfort became the new motto of the company. GM also made a path-breaking offer - the public could now buy a car on credit. The five brands of GM - Pontiac, Cadillac, Buick, Oldsmobile and Chevrolet began changing every year with the focus being directed mainly at looks and style. This strategy paid rich dividends. Ford was pushed to the backseat again by GM.

The great Wall Street crash in 1929 put an abrupt stop to all expansion plans at GM for the time being. Stocks of GM fell rather badly. But, by early 1930's GM bounced back and bought the Yellow Coach bus company. In 1930, GM bought Electro-Motive Corporation, the internal combustion engine railcar builder. The next 20 years saw GM powered diesel locomotives running on American railroads. December 31, 1955 is another landmark in the history of GM. GM became the first company to make more than a billion dollars in a year.

There was a time in the History of GM when it was the largest corporation in the US. The history of GM also shows that there was a time when GM was the single largest employer in the world. But, in recent times GM has been beset with financial woes. November 2005 saw GM booking a $4 billion loss and about 30,000 employees were laid off. 12 plants were closed down.

Tuesday, September 9, 2008

Tips For Buying Car

10 Great Tips For Buying Car Tires Online

Cars need tires and it is best to buy new tires. The key is to get high quality car tires at low prices. The market online and offline is filled with a huge variety of tires. Choose tires with care and get a set of tires that are most suited to your car.

The first step in buying car tires is to follow recommendations made by the car manufacturer. Unless you are an auto mechanic or formula one car racer what the manufacturer recommends as suitable tires for the car are the best choice.

1. Get all the parameters right. From the side of the tires or your car manual jot down : vehicle application; tire width; aspect ratio; radial designation; wheel diameter; load index; speed rating; DOT; ply construction; load and pressure limits; tread wear and traction ratings.

2. Be smart shop around for the best deal locally as well as online.

3. Check aspects like factory warranties and shop guarantees before paying for the tires.

4. Know which features are important and find tires that will give you safety, longevity, and peace of mind.

5. Find out if you are buying online how the tires will be delivered to you, who will mount and balance the tires. Many online sites offer tires for great rates but you will have to pay for shipping as well as for a mechanic to fit the tires. So well before buying check out the instructions on the website and find out exactly how much it will cost to get new tires fixed on the car.

6. While many recommend buying refurbished tires in the long run new tires will stand you in good stead. While you may save money on purchase the wear and tear will be quicker.

7. Most people buy all season tires but in case you live in a snow bound or very wet region you may need special car tires for specific seasons. If in doubt consult an automotive expert.

8. Check whether the tires you are considering buying are for passenger vehicles and radial. Tubeless tires are great for urban roads that are well maintained.

9. Always get the tires fitted by an expert and ensure that balancing is done. Ask about how to prevent new tire wear and tear by rotating the tires/wheels.

10. Always replace tires in pairs. It is best to replace all four but in case of budget constrains then do the needful two at a time. The front wheels first followed by the back wheels. Never replace one in the front and the other at the back.

Read up about tires on the internet. When in doubt ask the manufacturer. If you care for your car and its tires then the car will serve you well.

Caring for Leather Car Interiors

Leather consists of thousands and thousands of intertwined fibers, with penetrable pores throughout—just like skin. Proper maintenance starts with cleaning the fibers. Cleaning removes fiber-severing abrasives and pore clogging dirt and dust, both of which will breakdown the leather over time and give it a less than pleasing texture and appearance.

If you have pets, then you may want to invest in pet pads or pet seat covers for your interior. You will also want to look into a good reflective sun shield.

With regular cleaning and conditioning, a leather interior will last for the life of the vehicle. Leather is tough and abuse resistant. The main concern is to determine is what type of leather interior you have, then choose cleaners and conditioners designed specifically for the task. Traditional leather interiors are made of 100% leather, where as some modern interiors are leather coated with a supple vinyl.

A quick test to determine which type you have is to use a small amount of cool clean water. Traditional leather will absorb water, where vinyl coated leather will repel it. Either way, a few drops of water won't harm your interior.

The next step is to determine the right cleaners and conditioners for your leather. Saddle soap and conditioners, while good for your baseball glove or go-go boots, are not to be used on automotive leather of any kind. The soap contains alkalis, which can permanently damage the material in your seats. Household detergents and cleaners can damage leather as well. Always use only a product designed for the type of leather your vehicle has.

Removing harmful oil and dirt deposits is the crucial first step. Always use clean soft cloths to prevent damage to, or inadvertent removal of the leather dye. Stubborn dirt lodged into crevices may require the use of an upholstery brush. Removal of gunk and grime must be done before conditioning the leather, as you don't want to permanently push these contaminants into the pores.

The next step, probably even more important, is conditioning. This nourishes and moisturizes to lubricate individual fibers, keeping them from becoming brittle and dry. It replaces essential, natural oils that evaporate. How can you tell a good conditioner? A good conditioner will offer UV protection. Like human skin, ultra-violet rays will quickly cause deterioration of the leather and shorten its lifespan significantly. A good conditioner will be absorbed into the leather, not sit atop the surface or leave residue behind. The surface should not be oily after application. The very best conditioners are pH balanced, have stain repellants, waterproofing agents to protect from accidents.

While cleaning and conditioning your interior be sure not to leave any tools or sharp objects in your pockets that could put a hole in your seats and your good time. As with any cleaner, conditioner or chemical that involves the potential for ruining something really expensive, always test first in a small, inconspicuous area.

Inexpensive leather cleaners and conditioners will contain petroleum distillates, silicon or silicon oils, and gloss agents that deliver an inferior, greasy finish that does nothing for the leather, and transfers to anything that the leather comes in contact with. These chemicals are harmful to your leather.

Electrical Parts Ford’s

Troubleshooting Your Ford’s Alternator and Other Electrical Parts

What’s the most important part in your car? You would probably answer it’s the engine. The engine, of course, is very essential since combustion takes place here. It is often referred to as the “heart of the vehicle.” However, other systems and auto parts might begin to protest. Certainly, every part in the vehicle has a role to perform; therefore, any of the auto parts cannot be disregarded. Among the auto parts that play equally important role with the engine parts are the electrical parts.

Electrical parts take charge of your car’s power supply. It produces, stores and distributes electricity to all parts in the car that needs it—especially the engine. Basically, your car cannot operate without electricity. In order for the engine to produce power for the wheels, the burned fuel and air mixture must be ignited. The spark plug needs electricity in order to fire the compressed air-fuel mixture and create a powerful expansion of the vapor.

A problem on your electrical system, such as a faulty alternator or battery, could render your car useless; thus, you must be cautious if anything abnormal happens to your Ford’s electrical system. The battery wears out the fastest and so it needs to be checked every now and then. Likewise, check on your alternator. This part is the source of electricity in your car; thus, when damaged, nothing will supply power to the battery and the rest of the vehicle.

What are the indications of a faulty alternator? First and foremost, if your car won’t start at all and all you hear is a click, your alternator might be in bad condition. The battery has not been charged properly so it doesn’t have sufficient amount of power for the engine to start.

However, even if your engine still starts, you cannot be confident enough that nothing is wrong with your Ford car’s alternator. Check your headlights when idling, if the light gets weaker and weaker, check for loose connections in the alternator. Likewise, check the alternator belt. If it is not tight enough, the alternator won’t be able to charge properly. Furthermore, look if there is a formation of rust as this will affect the charging ability of your Ford Alternator.

If your alternator is damaged severely, better start thinking about replacing your old Ford alternator. Remember that the battery supplies power to some car parts only when the alternator is not in use or if the engine is not yet running. If the engine is on, the alternator is the “star” of the electrical system; so a faulty alternator would eventually wear out the battery since it shall take charge of providing for the car’s electrical needs.

Replacing your alternator might be the sole solution to your problem. Don’t worry because OEM-quality aftermarket and replacement parts for American vehicles such as Ford Parts are easy to find nowadays, even Ford parts used. You can visit http://www.carpartsmax.com, one of the country’s leading auto parts suppliers. High quality Ford alternators are offered here in this store. Make sure your Ford alternator works to its full potential, get it only from a trusted source like Ford Parts Online.

Great Ford Parts Discount deals are also offered on all high quality Ford parts (http://www.carpartsmax.com/ford-parts.html) from Ford A/C condenser to Ford bumpers, Ford hoods, Ford mirror, Ford radiator, Ford wheels, Ford spoiler, Ford grille, Ford headlights and Ford window regulators. Check out Ford Parts Online now and get your Ford vehicle back into excellent driving condition once again.


Car Warning Lights

Car Warning Lights: Is My Car Going To Blow Up? Myths & Facts

Today’s vehicles are equipped with an array of warning lights. Of course we’re all familiar will the seat belt warning and the door ajar indicator; however, with the automotive industry’s technological advancements there are a number of warning lights that can be quite alarming.

Following is a Question and Answer Guide on some of the more common Warning Light concerns. Note: due to the frequency of the Check Engine Warning Light, it has a section all its own. Visit www.repairtrust.com/check.html.

1) SRS Light (Supplemental Restraint System): the supplemental restraint system is your Airbag System. It may incorporate a variety of active, passive, and even pre-safe technology depending on the vehicle. Given that the SRS System is a safety system, it is well monitored with numerous sensors and automatic self-tests. The slightest malfunction in this system illuminates the SRS light.

"Can the vehicle be driven with an SRS Light on?" Yes, at the owner’s risk. There are thousands of vehicles on the road without SRS technology.

"Is the airbag going to blow up?" It’s unlikely. When the SRS Light is on the system is inoperative.

2) ABS Lights: The Anti-Lock Brake System Warning Light is another common occurrence in today’s vehicles. The ABS system helps to keep you from skidding out of control during braking by limiting your wheels from locking up/skidding.

The ABS system is often integrated with traction control and stability systems, all of which are designed to keep you safe during panic stops, wheel slippage, and handling.

"Do I need brakes?" You might, but that’s not why the ABS Light is on. The ABS Warning System does not monitor disc brake pad or disc brake rotor wear (see the Padlight Warning section below)

"Can the vehicle be driven?" Like the SRS system, the vehicle can be driven at the owner’s risk as there are many vehicles still on the market without the enhanced safety features of ABS.

"Why is my ABS light on? How do I reset the ABS Light?" These are simple questions with a multitude of answers depending on the vehicle in question. For a QUICK and FREE solution, follow the information and guidelines for Resetting Check Engine Light, and apply them to your ABS light.

3) Low Coolant Light: The Low Coolant Light will come on when the coolant drops below the coolant level sensor—generally one to two quarts. If this light is on, there are two primary possibilities. The most common is a coolant leak. The other is an electrical fault in the warning lamp circuit. Have them checked out.

"Can it be driven?" If there are no major leaks, the vehicle is not overheating (and does not start to overheat), and there is still some evidence of coolant in the overflow bottle, it can be driven. If you can see coolant leaking on the ground—tow it. When in doubt, always tow it!

4) Red Oil Light On: Stop driving immediately and shut the engine off! If a Red Oil Warning Light comes on PAY ATTENTION.

The best case scenario is that your engine oil is a little low. The second best case scenario is that there is an electrical issue with the Oil Level Warning System circuit.

First, follow your owners’ manual’s instructions to check your oil. If low, add as recommended—make sure you don’t see it dripping or pouring out on the ground, which would indicate a “major” engine leak.

If the oil is not low and your engine is making ticking, knocking, or unusual noises, Tow it!

If everything appears ok, and you’re a bit of a gambler, it may just be an issue with the warning lamp circuit. In this case, get your vehicle checked out at your earliest convenience.

The worst case scenario is internal engine damage.

Note: many of today’s vehicles have very sensitive and sophisticated Oil Level Warning Systems. You may be alerted of oil level too high, or oil level too low. Again, refer to your owners’ manual’s instructions.

So whether it’s a 1993 Ford Aerostar Check Oil Light, or a question of “Why does oil light flash in Saab automobile,” PAY ATTENTION!

5) Red Brake Warning Lights: Generally, Red Warning Lights mean DANGER. In the case of a Red Brake Warning Light, there may be a hydraulic brake fluid leak. If the brake pedal feels abnormal or spongy—don’t drive—Tow It!

"Can I drive it?" If the car is stopping ok, and you’re a gambler, go ahead. If the brake pedal feels different than usual, or if the vehicle is not stopping properly, don’t drive it!

Note: make sure that your emergency brake is not on or partially engaged, as this will illuminate a Red Brake Warning Light.

6) Yellow Brake Warning Light (Padlight): This is an early warning system for brake pad wear. Essentially, as your disc brake pads wear down, at a certain point a sensor is tripped to alert you that you will need brakes soon.

"Can I drive the vehicle, and for how long?" Yes, you can continue to drive. How long depends on your driving style. City drivers (city driving is generally harder on brakes due to the constant stop and go) will likely need their brakes addressed before someone who does primarily highway driving.

"Will I do more damage to the brakes?" Depending on how long you continue to drive you could conceivably wear your disc brake pads down to the metal backing plate, which could then damage your disc brake rotors and, in rare cases, the disc brake calipers. However, with many of today’s brake systems, the replacement of the disc brake rotors along with the disc brake pads is required or strongly recommended.

Important: It is better to have your brakes checked early to increase the possibility of saving money by not having to replace the rotors. However, many of today’s brake disc pads and rotors require replacement not due to wear, but due to rust and corrosion; thus rotor replacement is often necessary anyway. Brake calipers rarely need replacing during regular brake work.

7) Air Suspension Lights (Airmatic, Air Ride, Hydraulic Suspensions): Suspension Warning Lights illuminate when the suspension’s monitoring system has detected a fault. Often there is a leak—either air or hydraulic fluid.

"Can I drive it?" Sometimes. But if the suspension is lower than usual, and/or the vehicle just doesn’t feel right—Tow It! Extensive damage could result if the suspension drops too low while driving.

Note: air suspension system repairs are best left to the best, state-of-the-art service center you can find, preferably a dealership.

8) Tire Pressure Warning Light: This recent technological development causes quite a bit of confusion. Put simply, if your tire is getting low on air, your car lets you know via sensors mounted in various places depending on the model.

"What is the low tire pressure warning light reset procedure?" Sometimes the reset procedure is as simple as pressing a button. Other times one has to set the tire pressures, recalibrate the on-board computer, genuflect and cross two fingers. Check your owners’ manual or call a specialist or dealer.

Note: Local shops and franchises (for the most part) lack familiarity with Tire Pressure Monitoring Systems given that this is a fairly recent technological development. You can refer to How to Reset Check Engine Light, and follow the tips, and suggestions for getting it reset.

9) Emission Warning Light: This light is similar to the Check Engine Light. Many European models such as Volvos have this type of Warning System. It’s essentially letting you know that an emissions component has failed or detected a fault. Follow the Check Engine Light information and tips to address this particular warning light.

Note: make sure you take it to a shop equipped to handle emissions work.

10) Resetting Oil Lights (Oil Change Warning Lamps): Whether it’s a Toyota Oil Light Procedure, an Oil Change Warning Light Reset 2005 GMC Envoy, or the process to Reset 1999 M3 Oil Service Light, all require a specific course of action.

Most owners’ manuals have this information. You should find it under maintenance or oil service. You can also call your local mechanic, who resets oil service lights everyday on a variety of models. A dealership will certainly have the information; however, finding someone in a dealership who can translate it effectively may be difficult.

If the above fails, see the process for Resetting Check Engine Light.

Note: several European models require special tools to reset the oil service light, thus it’s best to call or visit a specialist or dealer.

Note: This information is not a substitute for your vehicle’s owners’ manual. It is meant to be a general guide. Always refer to manufacturer vehicle-specific guidelines.

Note: PAY ATTENTION to how you are billed for any of the above warning concerns. Because of their technical nature they can get “unnecessarily” very pricy, quickly.

Monday, September 8, 2008

Automotive Batteries

Think of the battery as the heart of your car. You need a battery you can count on to get your motor running and keep it pumping all day long.

The car battery is an essential element of the intricate network that makes your car start and keeps the engine running. The battery powers most of the car's electrical components and accessory structures, such as the headlights, turn signals, fans, etc. While the alternator provides most of the electrical needs of the entire car system, the battery can keep them going in the event of an alternator malfunction.

There are many batteries available at automotive supply stores, and it's important to know exactly which model is the right choice for your car. The wrong battery won't work in your car, and it may even cause damage to the vehicle. Knowing which battery is right for your particular vehicle is extremely important, and it can also help to learn about the various battery manufacturers and automotive supply companies. You should only have to buy a battery every few years, so make sure you're buying the right one.

* Size Matters: Buying a battery for your car is like choosing a pair of shoes for you. One size does not fit all. The size of the battery itself is important, as it needs to fit snugly into the space allotted under the engine's hood. If the battery is too small there is the risk of it becoming dismantled and causing vibrations or damage. Further, the battery will either be a top post or side post model, which will determine how it fits and operates.

* Power Up: You need to know your car's specific power requirements before purchasing a car battery. Some cars need an 8-volt battery, while others require a 12-volt. There are a number of considerations to take into account, such as the size of the car and the number of accessories that must be powered. A huge sound system, for example, can easily suck the life out of an average car battery. A 12-volt battery should be able to maintain at least 7.2 volts when the vehicle is starting and while it is operational.

* Chill Out: If you live in a cold-climate area, it's important to check the Cold Cranking Amps (CCA) before you buy. CCA is a measurement used to determine a battery's ability to start an engine at 0° Fahrenheit, within a 30 second period. A higher CCA rating means the battery will start your vehicle faster and more effectively in freezing weather.

* Get it in Writing: No matter how well known the manufacturer is, you need to get a written manufacturers warranty with your battery. Make sure that the battery is in original condition, and is not a recharged model. The quality and dependability of the battery you choose should be indicative of the warranty you're offered. Make sure that battery is guaranteed for the duration of the battery's life (ie: if you plan on using the battery for five years, look for a five-year warranty).

* Keep it Fresh: Whether you're buying bananas or batteries, you need to make sure they're fresh and damage-free. Just because it's a piece of car equipment, it's not OK for your battery to waste away on a stockroom shelf. Make sure that the battery you buy is produced by a known and respected manufacturer, and that it's fully charged and ready to start your car. If you're not careful, you can run the risk of purchasing a fake or recharged battery. Look on the side of a battery casing for a special label or decal. You'll find the month and year that the battery was shipped from the manufacturer's plant. The letters 'A' through 'M' represent months of the year. For example, 'A' is January and 'M' is December. The letter 'I' is not used. The numbers 1 through 9 denotes the year of manufacture. Therefore, if the sticker on your batter reads L4, you know that it was manufactured in November 2004.

A car battery provides starting power to your vehicle, so make sure it's dependable. Understand your car's requirements and know how to verify the quality of the battery before you make the final purchase.

Replacing Your Automotive Carpet

Nothing is more miserable or disgusting in a car than dirty and smelly carpet. Have you ever spilled soda, milk, motor oil or even bleach on your vehicle's carpet and thought to yourself that it would be nice to just replace the whole thing instead of trying to clean it? Well, it's actually possible to do just that, and the job isn't as difficult as you would think. Many people find it more cost efficient to replace their auto carpet, instead of trying to clean the dirt or smell from a soiled auto carpet.

What to buy?


Auto carpet can be purchased pre-molded to fit the form of your vehicle's floor pan. So, you do not need to buy flat automotive carpet and try to fit it to the bumps and ridges of your car's floor, but rather you can simply pull out the old carpet and drop in the new, pre-formed auto carpet. Buying this form of automotive carpet will make the job much easier and will eliminate most of the work. Sometimes, if you have a newer model of car, you can still buy carpet from the manufacturer, but in most cases the original OEM carpet will be 4 or 5 times more expensive than aftermarket auto carpet, and the quality of the carpet fibers can be inferior to the aftermarket carpet.

It is important to note that there are 2 types of automotive carpet backing. Most new cars, from the 90s and newer, have a type of backing/padding called Massback. It is a heavy foamlike rubber that is usually black. This type if backing is added to improve heat and sound insulation as well as some padding under the carpet. Most aftermarket auto carpet is made with a thin, plastic backing that doesn't add much in the way of padding or heat/sound insulation so most aftermarket auto carpet manufacturers will add a 1/2 inch thick jute padding to this type of carpet backing to add some padding. Some aftermarket carpet retail stores will sell you the same carpet with either type of backing.

The first thing you will need to do when replacing your auto carpet, is to purchase a carpet kit for your particular vehicle. It is important to point out that now would also be a good time to buy a matching set of floor mats from the same retail store where you buy your carpet. Most manufacturers cut your molded carpet and floor mats from the same roll of carpet and to ensure that you get the same exact die lot; you should order both at the same time.

Where to start?

Be sure to pull the new auto carpet out of the box as soon as it arrives, since it will be rolled up and crammed into the box. The carpet will need about 24-48 hours to "relax" and regain it's shape. Sometimes, letting it sit in a warm room, or direct sunlight will help speed up this process.

Once the carpet has relaxed, you can begin the job of installing the new auto carpet. The first step will be to remove the existing carpet from the vehicle. You may need to remove the sill plates by the doors, the seats and seat tracks if they are holding down the auto carpet and the center console. Basically, anything that is holding down the carpet will need to be removed in order to get the carpet out. Be careful not to destroy the existing carpet, and certainly do not throw the carpet away or discard it, as you will need to use it in a few minutes. Just set the carpet aside for the time being.

Now you should do a little prep work on the floor of your car to get ready to install the new carpet. At this time you can remove the old carpet padding, if any was left behind, but be sure not to remove any body insulation from the floor. You can install heat or sound insulation such as Dynamat at this time and patch or repair any holes in the floor of the vehicle. And it should go without saying, but sweep and clean up and dirt or loose matter from the floor of the vehicle.

How to Install

Most aftermarket auto carpet kits will come slightly oversized and without the pre-cut holes. So, there will be a little work to get the new carpet into the car. There are 2 methods of cutting and trimming your carpet to get it into the vehicle; you can choose which will work best for you. Your first option is to place the new auto carpet over your old carpet, trim the edges and cut the holes. If you chose this option, you will need to be very careful not to over cut the holes or cut too much from the edges, since you are using the old carpet instead of the vehicle itself. The 2nd option is to work the new carpet into the contours of the vehicle floor and trim the carpet as you go. This method will give you more accurate results, but may be a little more difficult. Either way, it is important not to cut and trim too much with any one cut. It is best to work slowly, making small cuts and double check that the carpet has not shifted after each cut.

A little secret for making the small holes for things such as the seat bolts is to make a small "X" cut with a knife blade where the hole was in the original auto carpet. You can then simply push the bolt through the carpet. There is usually no need to try to cut a complete hole in your new carpet.

Occasionally you will find that a small section of the auto carpet wants to lift up off the floor, or tries to create a small wrinkle. This can easily be fixed with a small shot of spray adhesive. It is not recommended to spray the entire floor of the car, since the molded carpet should be held in place with the seats and trim pieces that were holding the original carpet in place.

Once the auto carpet is in place, and trimmed to fit, now you can begin to replace the pieces that were holding the original carpet in place. If you removed the seats, sill plates and trim pieces, then all of these pieces will need to go back into the vehicle.

Once all of pieces are back in place, your job is complete. You will be amazed at how much difference a little work can make to the appearance of your vehicle, not to mention removing that horrible smell that some things like milk can leave behind!

Automotive Painting

A car with an excellent paint job is one of life's true joys. It's like being the kid with the best bike in the neighbourhood or the biggest piece of birthday cake. Whether you drive a '47 Eldorado, a '66 Beetle or an '07 fortwo, a great paint job will take your vehicle from ho-hum to headturner.

Actually creating a great automotive paint job takes skill and finesse. Automotive painting is one of the most arduous and painstaking tasks in crafting an automobile. It can also be one of the most costly. If you are on a budget, there are options for you. Some paint shops can deliver a good paint job for a fair price. Your other option is to take on the task yourself. If the paint job is a success, you'll have even more to brag about: a hot set of wheels AND a "do it yourself" tale to tell.

Achieving a great paint job is a step-by-step process. You simply can't rush automotive painting. Follow the basic steps of preparation, primer application, blocking, final paint coat and detail application. This can seem like a daunting task for any beginner, but the entire job can be completed in just a few days.

Prepare

Before you begin, check with local bylaws and regulations regarding the use of spray paint in homes and enclosed areas. The last thing you need is a legal holdup delaying your painting job.

Cleaning the car is your next crucial step. The car must be spotlessly clean and free of dirt. Use detergents to clean the car top to bottom, and then follow up with grease removers. After the car has been cleaned, it's time to begin sanding. An air sander (preferably a dual-action sander) should be used to remove the old paint from the car. This kind of sander will not cause body damage because it removes paint without digging like other sanders and grinders. Every trace of paint must be removed to create a perfect palette for your new paint job. Automotive detailing tape or even duct tape can be used to cover and protect other parts of the car, including plastic moldings and windows. In addition to removing the old paint, all traces of rust have to be sanded off. Rust will spread if ignored or untreated, and the last thing you want is body rot happening beneath your spiffy new paint. You can repair minor body flaws on the car's surface using fillers. Shape the compound with care using a sanding board, then follow up with a glazing compound. This step will help to ensure a smooth-as-glass finish on your ride.

Mask

After the whole car has been initially cleaned, then sanded, a final cleaning takes place and the vehicle is ready to be masked. In this step, every part of the car that shouldn't be touched by paint is covered and protected. Remember, you will be using high-grade automotive paint that doesn't wash off with water. Cover your windows, every light and reflector, all window rubbers, all chrome, tires, wheels, door handles, wipers.. take a good look and what needs to be masked. If you don't want even the tiniest bit of over spray on it, cover it up! The tools and materials needed for masking are available at automotive supply warehouses and hardware stores.

Prime

Priming is an essential step to providing a good foundation for your new paint. A flawless prime coat will help you to achieve a perfect paint job. Valspar epoxy is a good primer choice, combining dependable filling capabilities with minimal shrinking. After the primer has been applied, a second coat in a contrasting colour should be applied on top of the first layer. This will serve as a sanding guide. The primer should be sanded to a smooth finish, but don't sand too vigorously or you could actually damage the body of the car. When the priming is complete, a sealer is applied and a final sanding takes place.

Finishing off

In finishing off the automotive painting, it is essential to achieve uniform colour. The spray gun should be held ten to twelve inches away from the body to avoid streaks and runs. This is necessary when applying the basecoat, final coat and clear coat.

Regardless of the type of car you drive, a new paint job can turn it into a real showstopper. Automotive painting can be a time consuming task, but you can do it if you take it step by step. The creative energy will be good for your soul, and the compliments you receive will be great for your confidence.
Choosing A Good Automotive School Is Crucial To Your Career

Automotive school is a necessity for anyone who wants to pursue a career as an auto mechanic. However, the school you go to can affect the path your career takes after graduation. Factors such as quality equipment, knowledgeable instructors, strong degree and ASE certification programs, the school’s qualifications and reputation, and student services all lend themselves to the overall quality of your education. Therefore, it is important to thoroughly research the automotive schools you are considering before making a final decision.

Your goal in attending automotive school is to learn as much as possible about auto mechanics; therefore, it is important to ensure that the school will provide the training you need. Part of this training is plenty of hands on experience. A good automotive program should include not only classroom lectures about automotive principles and mechanical theories, but also ample opportunity to work on cars and practice your skills. Be sure to ask how the school gets an ample supply of cars for students to train on; some schools may rely on donations, while others may attract paying customers in the community with discounted rates.

The school you attend should also have an ample supply of up to date equipment. A school with a shortage of the proper tools will make it difficult for you to get sufficient practice, and old or damaged equipment can be a safety hazard. Since your education depends a great deal on the amount of hands on experience you get, the automotive school you attend should be fully equipped to meet the students’ needs.

Naturally, the curriculum is a major factor in the quality of your education. The school you attend should have several different degree programs to choose from, allowing students flexibility in choosing their career paths. A good automotive school also offers an Automotive Service Excellence (ASE) certification program, where students can become certified in different areas of expertise, adding to their qualifications and increasing their potential salaries. ASE certification requires passing at least one of more than forty available tests, as well as proof of at least two years of relevant work experience; the school you attend should fully support students in acquiring these certifications.

Accreditation is also an important indicator of the quality of education a school can provide. Accreditation verifies that a school meets a predetermined set of standards; however, there are many different accreditation agencies, so it is important to research not only a school’s accreditation, but also the accrediting agency’s reputation and standards. If being able to transfer courses you have taken is important to you, be sure to find out how many other schools are accredited by the agency, and whether the credits you earn at the school can be transferred.

Additionally, you should consider the school’s reputation: an education from a school with a good reputation can make you stand out from the other applicants and help you get a job, but an education from a school with a bad reputation can also hurt your chances of getting a good job. By searching the Internet and talking to other mechanics, you can find out whether a school is known for providing quality education. You may also want to contact several dealerships and garages and ask whether they would hire a graduate of one of your top choices. After all, your education must do two things: not only provide you with quality training, but also indicate to potential employers that you have received quality training.

Similarly, student services are an important part of a good automotive school. Examples of student services are financial aid and loan offices, student housing or assistance in finding housing, and the availability of internships. Job placement services are particularly important; most good schools will offer some type of job placement assistance to students and graduates. A school that guarantees job placement after graduation may indicate a high success rate among its students. Also, many schools have relationships with local dealerships and garages, which is a considerable benefit to students and alumni of the school.

Naturally, there are other, more personal deciding factors when choosing an automotive school, such as the cost of tuition and the school’s location. Ultimately, your decision will depend on which features are most important to you. Whether you make your decision based solely on the quality of education the school offers, or on a more tangible benefit such as affordability or location, be certain that you choose a school that will help you achieve the career you seek.

Online Automotive Supplies

When you were a kid, there was a neighbourhood mechanic who took care of all your family's automotive woes. Maybe you would tag along with your parents to the corner garage, where fan belts, spark plugs and tins of coolant were the extent of the supplies needed to get back on the road.

Times have changed and today, the automotive supply business has grown to become one of the world's most profitable industries. Automobile manufacturers are constantly under pressure to churn out unique new models. As a result, the automotive supply industry has grown every year to keep up with the demand for new parts to fix these new vehicles. The increased demand has also created an increase in supply. Many entrepreneurial people have opened their own supply shops to cater to the ever-increasing number of automobile owners and enthusiasts. Drivers want the best quality money can buy, and suppliers are happy to oblige with high quality components, parts and systems. It sometimes seems that when it comes to car supplies, money is no object.

Many of the automotive parts and component suppliers are involved in the distribution of original equipment manufacture (OEM) parts. In order to remain competitive against lower priced after-market competitors, these OEM dealers will often provide discounts on original and second hand parts. Thanks to the Internet, these suppliers are able to reach a massive market.

Internet Automotive Supply Stores

Car owners and enthusiasts want dependable automotive suppliers who can provide secure, dependable service, good quality and good selection; and of course, they want it all at a discounted price. If prices are too high or the product isn't up to par, these demanding consumers can and will easily take their business elsewhere.

No longer do local drivers visit the neighbourhood garage or automotive supply store for parts. Today's complicated vehicles demand a huge selection of intricate parts to stay running at full capacity -- or just to stay running at all. The mom and pop corner shops of yesteryear just don't offer the quality or the selection that the market demands today. As a result, automotive consumers are shopping around the world -- on the Internet -- to find exactly what they need.

Countless online automotive suppliers have flooded the Internet with options. It's a welcome shift in the industry that favors suppliers and consumers alike. With an online presence that literally opens them up to the global market, automotive suppliers now have a virtually limitless market, resulting in equally limitless profits. At the same time, consumers are now able to access a world of selection. The option to shop from suppliers around the world means consumers can find the parts they need at more affordable prices.

Get the Most From Internet Automotive Suppliers

Like all industries, the arrival of the Internet brought big changes to automotive suppliers. Consumers can log on and find exactly what they need, with a world of possibilities right at their fingertips. Any and every type of automotive part can be found online, usually at reduced prices, and these parts can be easily shipped anywhere in the world. To access this incredible global market, consumers simply log in and enter a search for the specific parts they require.

In seconds, thousands of website listings are immediately posted. There are major automotive suppliers, and there are names relatively unheard of. As with any e-commerce industry, selecting a reputable automotive supplier online should always be the number one priority. Consumers must always remember that the Internet is a huge place; for every trusted and authorized dealer, there are unscrupulous distributors just waiting to take someone's money. For this reason, choosing to deal with a well-known name can be a safer bet, for both better quality and more helpful service. One must purchase discount automotive supplies from unknown dealers with great caution; they may send the wrong parts, no parts at all or worse of all, faulty parts that can cause irreparable further damage to your vehicle.

It is possible to get a great deal on the Internet. As with any product, shop around to be sure you're getting good quality, trusted service and a fair price.

Repairing or Replacing

As far as automotive interiors, there is nothing more annoying or potentially dangerous than a sagging or separating automotive headliner. If you are not having this problem in your car, you have probably seen a car drive by with the headliner falling down into the back seat. If this problem is not repaired, eventually it could become a safety hazard by falling into the driver's field of vision.

What can be done?

There have been some temporary solutions offered in the past, such as those "twist in pins", but they are at best a temporary solution and will actually damage the headliner board, and cause more problems when it comes time for a more permanent fix.

The best solution is to completely replace the fabric of your headliner. You could have that done professionally, although that would be a rather expensive solution. A much more affordable solution would be a "do-it-yourself kit" that make this project something that anyone can do.

At stockinteriors.com we also offer a complete replacement for the entire board, which comes pre-covered with the fabric color of your choice. This option is only avaialble for a very small selection of vehicles.

What is a "Headliner"?

Most cars after the mid 70's have what is called a fabric covered headliner board. This board is usually made from a pressed material, much like cardboard. That headliner board is then covered with a foam backed headliner fabric, which is glued directly to the board. In most cases, the sagging or separation occurs when the fabric separates from the foam.

What should I buy?

When looking for a do-it-yourself kit, look for several things. First of all, make sure you are buying a quality material. Most fabric comes with either 1/8 inch thick foam, or 1/4 inch thick foam. It is usually best to go with the 1/4 inch thick foam.

Make sure that wherever you buy, you can get the exact color that you want


Saturday, September 6, 2008

Rapid Vehicle Motor Company

The Rapid Motor Vehicle Company was started in 1902 by Max Grabowski.

It was the manufacturer of some of the earliest trucks and was purchased in 1909 by GM. In 1912 the name GMC was first used at the New York Auto Show and in 1996 the suffix Truck was dropped.

What most people don't know is that GMC also makes cars.

In 1902 Max Grabowski founded a company called the "Rapid Motor Vehicle Company", which developed some of the earliest commercial trucks ever designed. In 1909 the company was bought by General Motors to form the basis of the General Motors Truck Company, from which GMC Truck was made. In 1912 the name "GMC Truck" was first shown at the New York Auto Show. In 1996 GM dropped the word 'truck' from the GMC Truck name, thus creating the GMC name as we know it today. There never was a Grabowski Motor Company or a Grabowski Motor Corp.

They now make personal automobiles, as well as pickup truck and bus engines.

General Motors Corporation NYSE: GM, also known as GM, is a United States-based automobile maker with worldwide operations and brands including Buick, Cadillac, Chevrolet, Daewoo, GMC, Holden, Hummer, Opel, Pontiac, Saturn, Saab, and Vauxhall Chevrolet and GMC divisions produce trucks, as well as passenger vehicles. Other brands include ACDelco, Allison Transmission, and General Motors Electro-Motive Division that produces diesel-electric locomotives. GM also has stakes in Isuzu, Subaru, and Suzuki in Japan and a joint venture with AutoVAZ (Lada) in Russia. In December 2003, it acquired Delta in South Africa, in which it had taken a 45 percent stake in 1997, and which is now a fully-owned subsidiary, General Motors South Africa.

GM's headquarters are in the Renaissance Center in Detroit, Michigan.

General Motors is the world's largest vehicle manufacturer and employs over 340,000 people. In 2001, GM sold 8.5 million vehicles through all its branches. In 2002, GM sold 15 percent of all cars and trucks in the world. They also owned Electronic Data Systems from 1984 to 1996 which is a former Ross Perot company and, prior to selling it to News Corporation, DirecTV. GM owned Frigidaire from 1918 to 1979.

The current chairman (since May 1, 2003) and chief executive officer (since June 1, 2000) is Rick Wagoner, succeeding John F. Smith, Jr.

General Motors is selling its 20 percent stake in Fuji Heavy Industries, the parent of Subaru, in a deal that could raise more than $700 million as per news released on October 6, 2005.

Also, General Motors Canada auto workers voted on Sunday to ratify a new contract that will lay off 1,000 workers over the next three years, the Canadian Auto Workers and GM said.

General Motors lost 2.5 billion dollars last year, and would have made a profit if it was not saddled with 6 billion dollars in health costs.

The UAW and GM are now reaching agreement to reduce this health cost by about 1 billion dollars annually.


Car Show Attraction


How To Plan A Car Show Attraction


Antique classic cars, especially collector and specialty automobiles are a hot attraction for any event—whether indoor or outdoor. How do you get the cars to display? If you are a classic car club, members are happy to participate with their vintage rides. Another option is contributing a donation to a nonprofit car club for their service.

Main Attraction

These beautiful motorcars are show quality. So having a contact with a car club is essential. Individual clubs have different rules and regulations for displaying cars. If you are planning a classic car attraction, you should contact the car club as soon as you decide that you want to have a car show. Time is of the essence to work out the details, and get on their calendar, in the car show season. Prepare questions prior to making the call to appear organized and save time. Some frequently asked questions are:

  • What is the donation amount for your service?
  • How long can the cars be exhibited?
  • How many cars will you bring?

A car show requires a large venue with sections for exhibitors, vendors and visitors parking. Overall, you will need an area big enough for everyone’s ease of movement and equipment storage.

Sub-Attractions

Some car show events feature the main attraction, which are the classic cars without considering sub-attractions such as:

  • Disc Jockey and musicians
  • Food and beverage vendors
  • Swap meet exhibitors
  • Children’s activities

Just think about it. A car show with just a main attraction could possibly be boring. A great attraction is built with layers such as automobiles for visual, food for smell, music for sound, and games for interactivity to stimulate visitors—all of which contribute to having a good time—and will make your car show much more attractive.


Fuel and propulsion technologies


Most automobiles in use today are propelled by gasoline (also known as petrol) or diesel internal combustion engines, which are known to cause air pollution and are also blamed for contributing to climate change and global warming.[13] Increasing costs of oil-based fuels, tightening environmental laws and restrictions on greenhouse gas emissions are propelling work on alternative power systems for automobiles. Efforts to improve or replace existing technologies include the development of hybrid vehicles, and electric and hydrogen vehicles which do not release pollution into the air.

Petroleum fuels

Diesel


Diesel-engined cars have long been popular in Europe with the first models being introduced in the 1930s by Mercedes Benz and Citroen. The main benefit of diesel engines is a 50% fuel burn efficiency compared with 27%[14] in the best gasoline engines. A down-side of the diesel is the presence in the exhaust gases of fine soot particulates and manufacturers are now starting to fit filters to remove these. Many diesel-powered cars can also run with little or no modifications on 100% biodiesel.

Gasoline


Gasoline engines have the advantage over diesel in being lighter and able to work at higher rotational speeds and they are the usual choice for fitting in high-performance sports cars. Continuous development of gasoline engines for over a hundred years has produced improvements in efficiency and reduced pollution. The carburetor was used on nearly all road car engines until the 1980s but it was long realised better control of the fuel/air mixture could be achieved with fuel injection. Indirect fuel injection was first used in aircraft engines from 1909, in racing car engines from the 1930s, and road cars from the late 1950s.[14] Gasoline Direct Injection (GDI) is now starting to appear in production vehicles such as the 2007 (Mark II) BMW Mini. Exhaust gases are also cleaned up by fitting a catalytic converter into the exhaust system. Clean air legislation in many of the car industries most important markets has made both catalysts and fuel injection virtually universal fittings. Most modern gasoline engines also are capable of running with up to 15% ethanol mixed into the gasoline - older vehicles may have seals and hoses that can be harmed by ethanol. With a small amount of redesign, gasoline-powered vehicles can run on ethanol concentrations as high as 85%. 100% ethanol is used in some parts of the world (such as Brazil), but vehicles must be started on pure gasoline and switched over to ethanol once the engine is running. Most gasoline engined cars can also run on LPG with the addition of an LPG tank for fuel storage and carburetion modifications to add an LPG mixer. LPG produces fewer toxic emissions and is a popular fuel for fork lift trucks that have to operate inside buildings.

Biofuels


Ethanol, other alcohol fuels (biobutanol) and biogasoline have widespread use an automotive fuel. Most alcohols have less energy per liter than gasoline and are usually blended with gasoline. Alcohols are used for a variety of reasons - to increase octane, to improve emissions, and as an alternative to petroleum based fuel, since they can be made from agricultural crops. Brazil's ethanol program provides about 20% of the nation's automotive fuel needs, as a result of the mandatory use of E25 blend of gasoline throughout the country, 3 million cars that operate on pure ethanol, and 6 million dual or flexible-fuel vehicles sold since 2003.[15] that run on any mix of ethanol and gasoline. The commercial success of "flex" vehicles, as they are popularly known, have allowed sugarcane based ethanol fuel to achieve a 50% market share of the gasoline market by April 2008.[16][17][18]

Electric




The first electric cars were built around 1832, well before internal combustion powered cars appeared.[19] For a period of time electrics were considered superior due to the silent nature of electric motors compared to the very loud noise of the gasoline engine. This advantage was removed with Hiram Percy Maxim's invention of the muffler in 1897. Thereafter internal combustion powered cars had two critical advantages: 1) long range and 2) high specific energy (far lower weight of petrol fuel versus weight of batteries). The building of battery electric vehicles that could rival internal combustion models had to wait for the introduction of modern semiconductor controls and improved batteries. Because they can deliver a high torque at low revolutions electric cars do not require such a complex drive train and transmission as internal combustion powered cars. Some post-2000 electric car designs such as the Venturi Fétish are able to accelerate from 0-60 mph (96 km/h) in 4.0 seconds with a top speed around 130 mph (210 km/h). Others have a range of 250 miles (400 km) on the EPA highway cycle requiring 3-1/2 hours to completely charge[20]. Equivalent fuel efficiency to internal combustion is not well defined but some press reports give it at around 135 mpg–U.S. (1.74 L/100 km / 162.1 mpg–imp).

Steam

Steam power, usually using an oil- or gas-heated boiler, was also in use until the 1930s but had the major disadvantage of being unable to power the car until boiler pressure was available (although the newer models could achieve this in well under a minute). It has the advantage of being able to produce very low emissions as the combustion process can be carefully controlled. Its disadvantages include poor heat efficiency and extensive requirements for electric auxiliaries.[21]

Air


A compressed air car is an alternative fuel car that uses a motor powered by compressed air. The car can be powered solely by air, or by air combined (as in a hybrid electric vehicle) with gasoline/diesel/ethanol or electric plant and regenerative braking. Instead of mixing fuel with air and burning it to drive pistons with hot expanding gases; compressed air cars use the expansion of compressed air to drive their pistons. Several prototypes are available already and scheduled for worldwide sale by the end of 2008. Companies releasing this type of car include Tata Motors and Motor Development International (MDI).

Gas turbine

In the 1950s there was a brief interest in using gas turbine (jet) engines and several makers including Rover and Chrysler produced prototypes. In spite of the power units being very compact, high fuel consumption, severe delay in throttle response, and lack of engine braking meant no cars reached production.

Rotary (Wankel) engines

Rotary Wankel engines were introduced into road cars by NSU with the Ro 80 and later were seen in the Citroën GS Birotor and several Mazda models. In spite of their impressive smoothness, poor reliability and fuel economy led to them largely disappearing. Mazda, beginning with the R100 then RX-2, has continued research on these engines, overcoming most of the earlier problems with the RX-7 and RX-8.

Rocket and jet cars

A rocket car holds the record in drag racing. However, the fastest of those cars are used to set the Land Speed Record, and are propelled by propulsive jets emitted from rocket, turbojet, or more recently and most successfully turbofan engines. The ThrustSSC car using two Rolls-Royce Spey turbofans with reheat was able to exceed the speed of sound at ground level in 1997.


Production


The large-scale, production-line manufacturing of affordable automobiles was debuted by Ransom Olds at his Oldsmobile factory in 1902. This concept was greatly expanded by Henry Ford, beginning in 1914.

As a result, Ford's cars came off the line in fifteen minute intervals, much faster than previous methods, increasing production by seven to one (requiring 12.5 man-hours before, 1 hour 33 minutes after), while using less manpower.[12] It was so successful, paint became a bottleneck. Only Japan black would dry fast enough, forcing the company to drop the variety of colors available before 1914, until fast-drying Duco lacquer was developed in 1926. This is the source of Ford's apocryphal remark, "any color as long as it's black".[12] In 1914, an assembly line worker could buy a Model T with four months' pay.[12]

Ford's complex safety procedures—especially assigning each worker to a specific location instead of allowing them to roam about—dramatically reduced the rate of injury. The combination of high wages and high efficiency is called "Fordism," and was copied by most major industries. The efficiency gains from the assembly line also coincided with the economic rise of the United States. The assembly line forced workers to work at a certain pace with very repetitive motions which led to more output per worker while other countries were using less productive methods.

In the automotive industry, its success was dominating, and quickly spread worldwide seeing the founding of Ford France and Ford Britain in 1911, Ford Denmark 1923, Ford Germany 1925; in 1921, Citroen was the first native European manufacturer to adopt the production method. Soon, companies had to have assembly lines, or risk going broke; by 1930, 250 companies which did not, had disappeared.[12]

Development of automotive technology was rapid, due in part to the hundreds of small manufacturers competing to gain the world's attention. Key developments included electric ignition and the electric self-starter (both by Charles Kettering, for the Cadillac Motor Company in 1910-1911), independent suspension, and four-wheel brakes.

Since the 1920s, nearly all cars have been mass-produced to meet market needs, so marketing plans often have heavily influenced automobile design. It was Alfred P. Sloan who established the idea of different makes of cars produced by one company, so buyers could "move up" as their fortunes improved.

Reflecting the rapid pace of change, makes shared parts with one another so larger production volume resulted in lower costs for each price range. For example, in the 1930s, LaSalles, sold by Cadillac, used cheaper mechanical parts made by Oldsmobile; in the 1950s, Chevrolet shared hood, doors, roof, and windows with Pontiac; by the 1990s, corporate drivetrains and shared platforms (with interchangeable brakes, suspension, and other parts) were common. Even so, only major makers could afford high costs, and even companies with decades of production, such as Apperson, Cole, Dorris, Haynes, or Premier, could not manage: of some two hundred American car makers in existence in 1920, only 43 survived in 1930, and with the Great Depression, by 1940, only 17 of those were left.

In Europe much the same would happen. Morris set up its production line at Cowley in 1924, and soon outsold Ford, while beginning in 1923 to follow Ford's practise of vertical integration, buying Hotchkiss (engines), Wrigley (gearboxes), and Osberton (radiators), for instance, as well as competitors, such as Wolseley: in 1925, Morris had 41% of total British car production. Most British small-car assemblers, from Abbey to Xtra had gone under. Citroen did the same in France, coming to cars in 1919; between them and other cheap cars in reply such as Renault's 10CV and Peugeot's 5CV, they produced 550,000 cars in 1925, and Mors, Hurtu, and others could not compete.[12] Germany's first mass-manufactured car, the Opel 4PS Laubfrosch (Tree Frog), came off the line at Russelsheim in 1924, soon making Opel the top car builder in Germany, with 37.5% of the market.


Automobile

An automobile or motor car is a wheeled motor vehicle for transporting passengers, which also carries its own engine or motor. Most definitions of the term specify that automobiles are designed to run primarily on roads, to have seating for one to eight people, to typically have four wheels, and to be constructed principally for the transport of people rather than goods. However, the term is far from precise because there are many types of vehicles that do similar tasks.

Automobile comes via the French language, from the Greek language by combining auto [self] with mobilis [moving]; meaning a vehicle that moves itself, rather than being pulled or pushed by a separate animal or another vehicle. The alternative name car is believed to originate from the Latin word carrus or carrum [wheeled vehicle], or the Middle English word carre [cart] (from Old North French), and karros; a Gallic wagon.

As of 2002, there were 590 million passenger cars worldwide (roughly one car per eleven people).

History

Although Nicolas-Joseph Cugnot is often credited with building the first self-propelled mechanical vehicle or automobile in about 1769 by adapting an existing horse-drawn vehicle, this claim is disputed by some, who doubt Cugnot's three-wheeler ever ran or was stable. Others claim Ferdinand Verbiest, a member of a Jesuit mission in China, built the first steam-powered vehicle around 1672 which was of small scale and designed as a toy for the Chinese Emperor that was unable to carry a driver or a passenger, but quite possibly, was the first working steam-powered vehicle ('auto-mobile'). What is not in doubt is that Richard Trevithick built and demonstrated his Puffing Devil road locomotive in 1801, believed by many to be the first demonstration of a steam-powered road vehicle although it was unable to maintain sufficient steam pressure for long periods, and would have been of little practical use.

In Russia, in the 1780s, Ivan Kulibin developed a human-pedalled, three-wheeled carriage with modern features such as a flywheel, brake, gear box, and bearings; however, it was not developed further.

François Isaac de Rivaz, a Swiss inventor, designed the first internal combustion engine, in 1806, which was fueled by a mixture of hydrogen and oxygen and used it to develop the world's first vehicle, albeit rudimentary, to be powered by such an engine. The design was not very successful, as was the case with others such as Samuel Brown, Samuel Morey, and Etienne Lenoir with his hippomobile, who each produced vehicles (usually adapted carriages or carts) powered by clumsy internal combustion engines.

In November 1881 French inventor Gustave Trouvé demonstrated a working three-wheeled automobile that was powered by electricity. This was at the International Exhibition of Electricity in Paris.

Although several other German engineers (including Gottlieb Daimler, Wilhelm Maybach, and Siegfried Marcus) were working on the problem at about the same time, Karl Benz generally is acknowledged as the inventor of the modern automobile.

An automobile powered by his own four-stroke cycle gasoline engine was built in Mannheim, Germany by Karl Benz in 1885 and granted a patent in January of the following year under the auspices of his major company, Benz & Cie., which was founded in 1883. It was an integral design, without the adaptation of other existing components and including several new technological elements to create a new concept. This is what made it worthy of a patent. He began to sell his production vehicles in 1888.

Karl Benz

In 1879 Benz was granted a patent for his first engine, which had been designed in 1878. Many of his other inventions made the use of the internal combustion engine feasible for powering a vehicle.

His first Motorwagon was built in 1885 and he was awarded the patent for its invention as of his application on January 29, 1886. Benz began promotion of the vehicle on July 3, 1886 and approximately 25 Benz vehicles were sold between 1888 and 1893, when his first four-wheeler was introduced along with a model intended for affordability. They also were powered with four-stroke engines of his own design. Emile Roger of France, already producing Benz engines under license, now added the Benz automobile to his line of products. Because France was more open to the early automobiles, initially more were built and sold in France through Roger than Benz sold in Germany.

In 1896, Benz designed and patented the first internal-combustion flat engine, called a boxermotor in German. During the last years of the nineteenth century, Benz was the largest automobile company in the world with 572 units produced in 1899 and because of its size, Benz & Cie., became a joint-stock company.

Daimler and Maybach founded Daimler Motoren Gesellschaft (Daimler Motor Company, DMG) in Cannstatt in 1890 and under the brand name, Daimler, sold their first automobile in 1892, which was a horse-drawn stagecoach built by another manufacturer, that they retrofitted with an engine of their design. By 1895 about 30 vehicles had been built by Daimler and Maybach, either at the Daimler works or in the Hotel Hermann, where they set up shop after falling out with their backers. Benz and the Maybach and Daimler team seem to have been unaware of each other's early work. They never worked together because by the time of the merger of the two companies, Daimler and Maybach were no longer part of DMG.

Daimler died in 1900 and later that year, Maybach designed an engine named Daimler-Mercedes, that was placed in a specially-ordered model built to specifications set by Emil Jellinek. This was a production of a small number of vehicles for Jellinek to race and market in his country. Two years later, in 1902, a new model DMG automobile was produced and the model was named Mercedes after the Maybach engine which generated 35 hp. Maybach quit DMG shortly thereafter and opened a business of his own. Rights to the Daimler brand name were sold to other manufacturers.

Karl Benz proposed co-operation between DMG and Benz & Cie. when economic conditions began to deteriorate in Germany following the First World War, but the directors of DMG refused to consider it initially. Negotiations between the two companies resumed several years later when these conditions worsened and, in 1924 they signed an Agreement of Mutual Interest, valid until the year 2000. Both enterprises standardized design, production, purchasing, and sales and they advertised or marketed their automobile models jointly—although keeping their respective brands.

On June 28, 1926, Benz & Cie. and DMG finally merged as the Daimler-Benz company, baptizing all of its automobiles Mercedes Benz as a brand honoring the most important model of the DMG automobiles, the Maybach design later referred to as the 1902 Mercedes-35hp, along with the Benz name. Karl Benz remained a member of the board of directors of Daimler-Benz until his death in 1929 and at times, his two sons participated in the management of the company as well.

In 1890, Emile Levassor and Armand Peugeot of France began producing vehicles with Daimler engines and so laid the foundation of the automobile industry in France.

The first design for an American automobile with a gasoline internal combustion engine was drawn in 1877 by George Selden of Rochester, New York, who applied for a patent for an automobile in 1879, but the patent application expired because the vehicle was never built and proved to work (a requirement for a patent). After a delay of sixteen years and a series of attachments to his application, on November 5, 1895, Selden was granted a United States patent (U.S. Patent 549,160 ) for a two-stroke automobile engine, which hindered, more than encouraged, development of automobiles in the United States. His patent was challenged by Henry Ford and others, and overturned in 1911.

In Britain there had been several attempts to build steam cars with varying degrees of success with Thomas Rickett even attempting a production run in 1860. Santler from Malvern is recognized by the Veteran Car Club of Great Britain as having made the first petrol-powered car in the country in 1894 followed by Frederick William Lanchester in 1895 but these were both one-offs. The first production vehicles in Great Britain came from the Daimler Motor Company, a company founded by Harry J. Lawson in 1896 after purchasing the right to use the name of the engines. Lawson's company made its first automobiles in 1897 and they bore the name Daimler.

In 1892, German engineer Rudolf Diesel was granted a patent for a "New Rational Combustion Engine". In 1897 he built the first Diesel Engine. Steam-, electric-, and gasoline-powered vehicles competed for decades, with gasoline internal combustion engines achieving dominance in the 1910s.

Although various pistonless rotary engine designs have attempted to compete with the conventional piston and crankshaft design, only Mazda's version of the Wankel engine has had more than very limited success.